TRX700XX
| Description | Price | Photo |
 |
||
$544.95 |
 |
|
| CT Spark Arrestor – 12 Disc End Cap Kit with Bolts | $139.95 |
 |
| ATV Exhaust Turn Down End Cap –Turn down tip includes 6 stainless steel bolts. | $64.95 |
|
 |
||
| Head Porting – CT Racing has done significant amounts of flow bench and dyno testing to offer you the best port layout for your application. We highly recommend getting a valve job at the same time the head is being ported. Our CNC valve job ties in with the port work to offer extremely effective flow numbers. | $350.00 |  |
| 3 Angle Valve Job – Quality valve job. | $144.00 |  |
| 5 Angle Radius Race Valve Job – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. | $192.00 |
|
| 5 Angle Radius Race Valve Job for +1mm Exhaust Valves – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. The 5 angle valve job really shines on big valves as the seat diameter is opened up all the way into the aluminum casting, blending to the port work. Adding +1mm valves to a modified engine package helps the mid to top-end horsepower. Most aftermarket hi compression pistons are clearanced for +1mm valves. | $216.00 |  |
| 5 Angle Radius Race Valve Job for +1 or +2mm Intake & Exhaust Valves – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. The 5 angle valve job really shines on big valves as the seat diameter is opened up all the way into the aluminum casting, blending to the port work. Adding +1 or +2mm valves to a modified engine package helps the mid to top-end horsepower. Most aftermarket hi compression pistons are clearanced for the bigger valves. | $240.00 | |
| Split 4 Stroke Cases, Inspect Crank & Trans, & Reassemble | $575.00 | |
| Disassemble & Reassemble 4 Stroke Top-end (from bottom-end only) | $300.00 | |
| Disassemble Head, Clean Ports, Prep, & Reassemble | $75.00 | |
| Rebuild 4 Stroke Crankshaft (labor only) | $120.00 | |
 |
||
| Dura Blue Foam Air Filter | $47.34 |
 |
 |
||
| TRX700XX CP Piston Kit 102mm – Available in 11:1, 12:1, and 13:1 Comp Ratios. 11:1 piston is the best option for running pump gas. | $245.00 |
 |
| TRX700XX JE Piston Kit 102mm – Available in 11:1 and 12:1 Comp Ratio. 11:1 piston is the best option for running pump gas. | $196.58 |
 |
| TRX700XX Vertex Piston Kit 102mm – Available in 10.1:1 and 10.9:1 Comp Ratios. | $156.29 |
 |
| TRX700XX Vertex Piston Kit 105mm Big Bore 727cc – Available in 10.5:1 Comp Ratio. Aftermarket cylinder sleeve required. | $213.64 |
|
| TRX700XX Cometic Top-end Gasket Set – Available in 102mm and 104mm. EST = Extreme Seal Technology (includes valve stem seals) | $64.54 |
 |
| TRX700XX Hot Rods Crank – Available in +3mm Stroker. Main bearings not included. | |
 |
|
TRX700XX Hot Rods Complete Bottom End Kit – Available in +3mm Stroker. This kit includes main bearings, seals, gaskets, and crank. |
|
 |
| TRX700XX Hot Cam Camshaft – Available in Stage 1, Stage 2 , and Stage 3 | |
 |
| TRX700XX Kibble White Stainless Steel Valves – Available in Standard Intake or Exhaust and +1mm Oversized Intake Valves. Requires valve spring kit part #EC-KW-30-31350. | |
 |
| TRX700XX Kibble White Valve Spring Kit – This Kit (EC-KW-30-31350) is Recomended to use with above Kibble White Valves. | |
 |
 |
||
|
TRX700XX Hinson Clutch – Includes Fibers Only |
N/A |  |
 |
||
| Fasst 1-1/8″ Flexx Bars – These are the best off road bars money can buy. Bars come with three different elastomers to get the proper cushioning for your type of riding along with a cross bar pad in your color choice of blue, grey, or red. Please Note: 1-1/8″ bar mount kit is required. |  |
|
|
Fly Aero Taper 1-1/8″ Fat Bars with Bar Pad – Bars are available in black, gun metal, or silver. Please Note: 1-1/8″ bar mount kit is required. |
|
 |
|
Fly Universal 1-1/8″ Handlebar Mount Kit – This is a clamp set than converts your stock 7/8″ bar clamp to the 1-1/8″ Fat Bar set up. Can be used with any brand 1-1/8″ bars. |
|
 |
|
Streamline Reflex Pro Pack with Clutch and Brake Lever – Available in Black, Blue, Red, and Orange. |
|
 |
| Pro Design Tether Kill Switch – Available in Black, Blue, or Red | $36.95 |
|
| CV4 Billet Tether Kill Switch Mount – Handlebar mount for Pro Design and Pro Armor tether kill switches.This mount allows you to mount your switch to the bar without using up all of the spacing. Allows you to mount the switch much closer to the bend. Available in Black and Red. | $49.95 |
 |
 |
||
| Streamline Steel-braided Front Brake Line Kit – (Please specify color & length) Available in black, blue, clear, green, red, or smoke. Some colors and lengths may need to be special ordered. | |
 |
| Streamline Steel-braided Rear Brake Line – (Please specify color & length)Available in black, blue, clear, green, red, or smoke. Some colors and lengths may need to be special ordered. | |
 |
| Billet Brake Line Clamp – 1 pair (Please specify color) Can be used with any 3/4″ or 1″ diameter A-arm. Available in black, blue, red, or silver. | |
 |
