Kawasaki KX250F Parts and Accessories
This page is dedicated to KX250F Parts and Accessories. If you are looking for performance you have come to the right place! We carry pistons, valves, fuel controllers, intake kits, clutches, and so much more. We also specialize in many performance modifications and services. We offer porting, 3 or 5 angle valve jobs, dyno tuning, and even complete motor building services. So if you dont see it here then give us a call or email us.
| Description | Price | Photo |
 |
||
| KX250F Head Porting – CT Racing has done significant amounts of flow bench and dyno testing to offer you the best port layout for your KX250F. We highly recommend getting a valve job at the same time the head is being ported. Our CNC valve job ties in with the port work to offer extremely effective flow numbers. | $350.00 |  |
| KX250F 3 Angle Valve Job – Quality valve job. | $144.00 |  |
| KX250F 5 Angle Radius Race Valve Job – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. | $192.00 |
|
| KX250F 5 Angle Radius Race Valve Job for +1mm Exhaust Valves – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. The 5 angle valve job really shines on big valves as the seat diameter is opened up all the way into the aluminum casting, blending to the port work. Adding +1mm valves to a modified engine package helps the mid to top-end horsepower. Most aftermarket hi compression pistons are clearanced for +1mm valves. | $216.00 |  |
| KX250F 5 Angle Radius Race Valve Job for +1 or +2mm Intake & Exhaust Valves – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. The 5 angle valve job really shines on big valves as the seat diameter is opened up all the way into the aluminum casting, blending to the port work. Adding +1 or +2mm valves to a modified engine package helps the mid to top-end horsepower. Most aftermarket hi compression pistons are clearanced for the bigger valves. | $240.00 | |
| Split 4 Stroke Cases, Inspect Crank & Trans, & Reassemble | $575.00 | |
| Disassemble & Reassemble 4 Stroke Top-end (from bottom-end only) | $325.00 | |
| Disassemble Head, Clean Ports, Prep, & Reassemble | $95.00 | |
| Rebuild 4 Stroke Crankshaft (labor only) | $125.00 | |
 |
||
| ’04-’05 KX250F JE Hi Performance Piston Kit 77mm – Available in 13.5:1 Comp Ratio. |  |
 |
| ’06-’09 KX250F JE Hi Performance Piston Kit 77mm – Available in 13.8:1 and 14:1 Comp Ratios. | |
|
| ’06-’09 KX250F JE Hi Performance Piston Kit 79mm Big Bore 262cc – Available in 13:1 Comp Ratio. | |
|
| ’06-’09 KX250F JE Hi Performance Piston Kit 80mm Big Bore 270cc – Available in 13.5:1 Comp Ratio. | |
|
| ’10-’14 KX250F JE Hi Performance Piston Kit 77mm – Available in 13.5:1 and 14:1 Comp Ratios. | |
|
| ’06-’09 KX250F Wossner Piston Kit 77mm – Available in 13.5:1 and 13.9:1 Comp Ratio. Cylinder bore and replate may be required. | |
 |
|
’06-’09 KX250F Wossner Piston Kit 83mm Big Bore – Available in 13.5:1 Comp Ratio. Cylinder bore and replate may be required. |
|
|
|
’10 KX250F Wossner Piston Kit 77mm – Available in 13.2:1 and 13.9:1 Comp Ratios. Cylinder bore and replate may be required. |
|
|
| ’11-’14 KX250F Wossner Piston Kit 77mm – Available in 13.5:1 and 14.2:1 Comp Ratios. Cylinder bore and replate may be required. | |
|
|
’15-’16 KX250F Wossner Piston Kit 77mm – Available in 13.8:1 and 14.5:1 Comp Ratios. Cylinder bore and replate may be required. |
|
|
| ’04-’05 KX250F Vertex Hi Performance Piston Kit 77mm – Available in 12.5:1, 13.6:1, and 13.8:1 Comp Ratios. | $170.44* |  |
| ’06-’09 KX250F Vertex Hi Performance Piston Kit 77mm – Available in 13.5:1 and 13.9:1 Comp Ratios. | $170.44* | |
| ’04-’09 KX250F Vertex Hi Performance Piston Kit 79mm Big Bore 263cc – Available in 12.6:1 Comp Ratios. | $174.89* | |
| ’04-’09 KX250F Vertex Hi Performance Piston Kit 80mm Big Bore 269cc – Available in 12.6:1 Comp Ratio. | $193.88* | |
| ’10 KX250F Vertex Hi Performance Piston Kit 77mm – Available in 13.2:1 and 13.8:1 Comp Ratios. | $193.88* | |
| ’11-’14 KX250F Vertex Hi Performance Piston Kit 77mm – Available in 13.2:1 and 13.9:1 Comp Ratios. | $193.88* | |
| ’11-’14 KX250F Vertex Hi Performance Piston Kit 80mm Big Bore 269cc – Available in 13.5:1 Comp Ratio. | $193.88* | |
| Cometic Top-end Gasket Set – Select model and bore size. Available in 77mm, 78mm and 80mm. | |
 |
| Crank Works Pro Rod Connecting Rods – Select make and model. Available in stock stroke. | $215.00 |
 |
| Hot Rods Connecting Rod – Select make and model. Available in stock stroke ONLY. | |
 |
| ’04-’10 KX250F Hot Cam Intake Camshaft – Available in Stage 1 and Stage 2. | $204.95 |  |
| ’04-’10 KX250F Hot Cam Exhaust Camshaft – Available in Stage 1 and Stage 2. | $224.95 | |
| ’11-’14 KX250F Hot Cam Intake Camshaft – Available in Stage 1 and Stage 2. | $204.95 | |
| ’11-’14 KX250F Hot Cam Exhaust Camshaft – Available in Stage 1 and Stage 2. | $224.95 | |
| KX250F Del West Titanium Intake Valves – Available in Standard, +1mm or +2mm Oversized. | |
 |
| KX250F Del West Titanium Exhaust Valves – Available in Standard, or +1mm Oversized. | |
|
|
’04-’14 KX250F CV4 Hi Performance Lightweight Racing Valve Spring Kit – Intake or Exhaust Available |
$69.90 |  |
| ’04-’14 KX250F CV4 Valve Spring Washer Kit | $24.95 |  |
 |
||
| Hinson Racing Clutch Kit – Includes Fibers, Steels, & Springs | |
 |
 |
||
| Fasst 1-1/8″ Flexx Bars – These are the best off road bars money can buy. Bars come with three different elastomers to get the proper cushioning for your type of riding along with a cross bar pad in your color choice of blue, grey, or red. Please Note: 1-1/8″ bar mount kit is required. |
$359.95 |
 |
|
Fly Aero Taper 1-1/8″ Fat Bars with Bar Pad – Bars are available in black, gun metal, or silver. Please Note: 1-1/8″ bar mount kit is required. |
|
 |
|
Fly Universal 1-1/8″ Handlebar Mount Kit – This is a clamp set than converts your stock 7/8″ bar clamp to the 1-1/8″ Fat Bar set up. Can be used with any brand 1-1/8″ bars. |
|
 |
|
Streamline Reflex Pro Pack with Clutch and Brake Lever – Available in Black, Blue, Red, and Orange. |
|
 |
| ASV F3 Pro Pack with Clutch and Brake Lever – Available in Black, Blue, or Red | $164.95 |
|
