Predator 500
|
Description |
Price | Photo |
 |
||
| Predator 500 Pipe Kit | $507.95 | |
| CT Spark Arrestor 12 Disc End Cap Kit with Bolts | $93.95 |
 |
| ATV Exhaust Turn Down End Cap – Turn down tip includes 6 stainless steel bolts. | $59.95 |
 |
 |
||
| Head Porting – CT Racing has done significant amounts of flow bench and dyno testing to offer you the best port layout for your application. We highly recommend getting a valve job at the same time the head is being ported. Our CNC valve job ties in with the port work to offer extremely effective flow numbers. | $350.00 |  |
| 3 Angle Valve Job – Quality valve job. | $144.00 |  |
| 5 Angle Radius Race Valve Job – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. | $192.00 |  |
| 5 Angle Radius Race Valve Job for +1mm Exhaust Valves – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. The 5 angle valve job really shines on big valves as the seat diameter is opened up all the way into the aluminum casting, blending to the port work. Adding +1mm valves to a modified engine package helps the mid to top-end horsepower. Most aftermarket hi compression pistons are clearanced for +1mm valves. | $240.00 |  |
| Split 4 Stroke Cases, Inspect Crank & Trans, & Reassemble | $475.00 | |
| Disassemble & Reassemble 4 Stroke Top-end (from bottom-end only) | $300.00 | |
| Disassemble Head, Clean Ports, Prep, & Reassemble | $75.00 | |
| Rebuild 4 Stroke Crankshaft (labor only) | $100.00 | |
 |
||
| Dura Blue Foam Air Filter | $80.13 |
 |
| Pro Design Pro Flow Foam Air Filter Kit | $170.95 |
 |
| Pro Design Pro Flow Replacement Foam Air Filter | $42.75 |
 |
| Pro Design Pro Flow K&N Air Filter Kit | $189.95 |
 |
| Pro Design Pro Flow Replacement K&N Air Filter | $66.45 |
 |
 |
||
| Predator 500 JE Hi Performance Piston Kit 99.2mm – Available in 11:1 and 12.5:1 Comp Ratio. 12.5:1 add $16.00 | |
 |
| Predator 500 JE Hi Performance Piston Kit 105mm – Available in 12.5:1 Comp Ratio. Cylinder bore and replate (stock cylinder) or aftermarket cylinder required. | |
|
| Predator 500 Wossner Hi Performance Piston Kit 99mm – Available in 12.5:1 Comp Ratio. | |
 |
| Predator 500 Cometic Complete Top-end Gasket Set – Available in 99mm. Available in EST = Extreme Seal Technology (includes valve stem seals) | $78.38 |
 |
| Predator 500 Winderosa Complete Gasket Set – This complete engine gasket set also includes all of the engine oil seals – crank, countershaft, and ETC. Winderosa Gaskets are extemely high quality US made gasket sets. | |
 |
| Predator/Outlaw 500 Web Cam Intake & Exhaust Camshaft Set – Available in Woods/MX, and TT/Drag builds | $621.00 |
 |
| Predator/Outlaw 500 Hot Cam Intake Camshaft – Available in Stage 1. Cam uses stock auto-decompression mechanism. Intake and exhaust cams sold separately. | |
 |
| Predator/Outlaw 500 Hot Cam Exhaust Camshaft – Available in Stage 1. Cam uses stock auto-decompression mechanism. Intake and exhaust cams sold separately. | |
|
 |
||
| Dynatek Programmable ATV Ignition – Direct plug in performance: 4 programmable timing curves, programmable rev limiter, external curve selector switch, plug-in module replacement, and more. Comes with CT Program Installed. |  |
|
 |
||
| Fasst 1-1/8″ Flexx Bars – These are the best off road bars money can buy. Bars come with three different elastomers to get the proper cushioning for your type of riding along with a cross bar pad in your color choice of blue, grey, or red. Please Note: 1-1/8″ bar mount kit is required. | $359.95 |
 |
|
Fly Aero Taper 1-1/8″ Fat Bars with Bar Pad – Bars are available in black, gun metal, or silver. Please Note: 1-1/8″ bar mount kit is required. |
|
 |
|
Fly Universal 1-1/8″ Handlebar Mount Kit – This is a clamp set than converts your stock 7/8″ bar clamp to the 1-1/8″ Fat Bar set up. Can be used with any brand 1-1/8″ bars. |
|
 |
| Pro Design Tether Kill Switch – Available in Black, Blue, or Red | $36.95 |
 |
| CV4 Billet Tether Kill Switch Mount – Handlebar mount for Pro Design and Pro Armor tether kill switches.This mount allows you to mount your switch to the bar without using up all of the spacing. Allows you to mount the switch much closer to the bend. Available in Black and Red. | $49.95 |
 |
 |
||
| Streamline Steel-braided Front Brake Line Kit – (Please specify color & length) Available in black, blue, clear, green, red, or smoke. Some colors and lengths may need to be special ordered. | |
 |
| Streamline Steel-braided Rear Brake Line – (Please specify color & length) Available in black, blue, clear, green, red, or smoke. Some colors and lengths may need to be special ordered. | |
 |
| Billet Brake Line Clamp – 1 pair (Please specify color) Can be used with any 3/4″ or 1″ diameter A-arm. Available in black, blue, red, or silver. | |
 |
 |
||
| Dura Blue Eliminator 2+2 Extended Axle – The Eliminator axle used for all forms of racing and high performance applications. Many of the models come with the patented Posi•Lock system which removes threaded sections from the flexing area of the shaft (a source of crack generation) | |
|
