DS650
| Description | Price | Photo |
 |
||
| CT Spark Arrestor – 12 Disc End Cap Kit with Bolts | $93.95 |
 |
| ATV Exhaust Turn Down End Cap – Turn down tip includes 6 stainless steel bolts. | $59.95 |
 |
 |
||
| Head Porting – CT Racing has done significant amounts of flow bench and dyno testing to offer you the best port layout for your application. We highly recommend getting a valve job at the same time the head is being ported. Our CNC valve job ties in with the port work to offer extremely effective flow numbers. | $350.00 |  |
| 3 Angle Valve Job – Quality valve job. | $144.00 |  |
| 5 Angle Radius Race Valve Job – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. | $192.00 |  |
| 5 Angle Radius Race Valve Job for +1mm Exhaust Valves – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. The 5 angle valve job really shines on big valves as the seat diameter is opened up all the way into the aluminum casting, blending to the port work. Adding +1mm valves to a modified engine package helps the mid to top-end horsepower. Most aftermarket hi compression pistons are clearanced for +1mm valves. | $240.00 |  |
| Split 4 Stroke Cases, Inspect Crank & Trans, & Reassemble | $675.00 | |
| Re-sleeve 4 Stroke Cylinder (labor only) | $185.00 | |
| Disassemble & Reassemble 4 Stroke Top-end (from bottom-end only) | $300.00 | |
| Disassemble Head, Clean Ports, Prep, & Reassemble | $150.00 | |
 |
||
| Dura Blue Foam Air Filter | $32.95 |
 |
 |
||
| DS650 JE Hi Performance Piston Kit 100mm – Available in 11.5:1 Comp Ratio. | |
 |
| DS650 JE Hi Performance Piston Kit 105mm 720cc Big Bore – Available in 11.5:1 Comp Ratio. 720cc Cylinder resleeve required. | |
|
| DS650 Cometic Top-end Gasket Set – Available in 101mm, 102mm, and 105.5mm Big Bore (does not include valve stem seals) | $68.00 |
 |
| DS650 Web Cam Intake & Exhaust Camshaft Set – Available in Woods, Desert (mid/top), Sand, Hi Rev, Drag builds | |
 |
| DS650 Kibble White Stainless Steel Valves – Available in Standard and +1mm Oversized in both Intake or Exhaust Valves. Recommended valve spring kit part #EC-KW-91-91010. | |
 |
| DS650 Hi Performance Racing Valve Spring Kit with Retainers – This Kit (EC-KW-91-91010) is Recommended to use with above Kibble White Valves | |
 |
 |
||
| Fasst 1-1/8″ Flexx Bars – These are the best off road bars money can buy. Bars come with three different elastomers to get the proper cushioning for your type of riding along with a cross bar pad in your color choice of blue, grey, or red. Please Note: 1-1/8″ bar mount kit is required. | $409.95 |
 |
| Pro Design Tether Kill Switch – Available in Black, Blue, or Red | $36.95 |
 |
| CV4 Billet Tether Kill Switch Mount – Handlebar mount for Pro Design and Pro Armor tether kill switches.This mount allows you to mount your switch to the bar without using up all of the spacing. Allows you to mount the switch much closer to the bend. Available in Black and Red. | $49.95 |
 |
 |
||
| Streamline Steel-braided Front Brake Line Kit – (Please specify color & length) Available in black, blue, clear, green, red, or smoke. Some colors and lengths may need to be special ordered. | |
 |
| Streamline Steel-braided Rear Brake Line – (Please specify color & length) Available in black, blue, clear, green, red, or smoke. Some colors and lengths may need to be special ordered. | |
 |
| Billet Brake Line Clamp – 1 pair (Please specify color) Can be used with any 3/4″ or 1″ diameter A-arm. Available in black, blue, red, or silver. | |
 |
 |
||
| Lone Star Racing Anti-vibration Steering Stem – Available in +1″ extended length and 7/8″ or 1 1/8″ Handlebar clamps included. |
$359.95 |
 |
 |
||
| ’00-’03 DS650 Dura Blue Eliminator 2+2 Extended Axle – The Eliminator axle used for all forms of racing and high performance applications. Many of the models come with the patented Posi•Lock system which removes threaded sections from the flexing area of the shaft (a source of crack generation). | |
 |
| ’04-’07 DS650 Dura Blue Eliminator 2+2 Extended Axle – The Eliminator axle used for all forms of racing and high performance applications. Many of the models come with the patented Posi•Lock system which removes threaded sections from the flexing area of the shaft (a source of crack generation). | |
|
