LT 80
 |
LT80/KFX80 Complete Power Package……$975.00 Kit includes: CT cylinder porting, head mod, carb mod, reed cage mod, air box lid mod, clutch mod, CT pipe/silencer, piston kit, and top-end gasket set (you will need to ship us the following: cylinder, head, carb, reed cage, air box lid, and front and rear clutch).
|
| CLICK Here for Shipping Instructions for Your Motor |
 |
|
Description |
Price |
Photo |
 |
||
| LT80 Standard Pipe |  |
|
| LT80 Long Travel Pipe – ONLY use w/ long travel swing arm below | |
|
 |
||
| Clutch Mod – Our clutch mod slows down the shifting of the clutch to keep the motor in the power curve, and significantly raises the stall speed so the motor is already in the power curve when the clutch engages. |
$99.00 |
|
| Carburetor Mod – The stock carb. can not be bored with it’s delta shape so we port it out making it significantly larger and showing a large gain in HP. for most applications we prefer this kit to the 20mm Keihin carb. kit, for significantly less money. Requires ported motor. |
$75.00 |
 |
| CT Racing LT80 Reeds – This is a low tension reed petal developed by CT Racing maximizing performance. | ||
| Reed Cage Mod with Reed |
$49.95 |
|
 |
||
| Dura Blue Foam Air Filter – Fits stock airbox. | $35.60 |
 |
|
K&N Air Filter – Fits stock airbox. |
|
 |
 |
||
| LT80 Pro-X Piston Kit – Available in 50mm, 50.50mm, 51mm, and 51.50mm |  |
|
| LT80 Wiseco Piston Kit – Available in 50mm, 50.25mm, 50.50mm, 50.75mm, 51.00mm, 51.50mm, and 52mm |  |
|
|
|
$13.95 |
|
| LT80 Winderosa Complete Gasket Set – This complete engine gasket set also includes all of the engine oil seals – crank, kickstart, countershaft, and ETC. Winderosa Gaskets are extemely high quality US made gasket sets. | |
 |
| LT80 Hot Rods Connecting Rod – Available in stock stroke. | |
 |
 |
||
| LT80 Long Travel Front A-arm Set – These A-arms require longer than stock shocks with more shaft travel (listed separately below). This A-arm designed widens the front end as well as reallocates the shock mounting point to a point with a significantly better ratio for quality wheel travel. The wheel travel is approximately double the stock wheel travel. The Suzuki LT 80 Long Travel Front Suspension Package is Tig welded using chromoly tubing in a precision built jig. *3 1/2” wider per side and +1” forward for improved handling and stability *6″ of travel with 11 7/8″ shock (3X over stock travel) * Wear resistant delrin pivot bushings with stainless steel pivot sleeves *1 year warranty* Package includes: A-arms, all required pivot bushings, pivot sleeves, heavy-duty Teixeira Tech stainless steel tie rods. Available in most popular Powder coat colors. Requires use of 11 7/8″ shock with 3” stroke. |
|
|
| LT80 Long Travel Rear Swing Arm Plate Kit – This long travel rear end kit requires a longer than stock shock with more shaft travel (listed separately below). These plates were designed to move the axel back allowing for a longer than stock rear shock to be used. The longer shock allows significantly more wheel travel, and substantially higher quality travel. The 80 Long Travel Rear Suspension Package is a long overdue product. These new housing plates will raise your 80 to the next level of performance and quality. These Plates give you the ability to adjust your bearing carrier for chain tension and still retain your skid plate. No more sloppy loose chains because of sprocket changes or worn out chains. *1 1/4” longer wheel base for improved handling and stability *5″ of travel with 12 1/2″ shock (over 2X stock travel) Package includes: Housing Plates, all required nuts, bolts, and spacers. Requires use of 12 1/2″ shock with 4 1/2” stroke. |  |
|
| LT80 Long Travel Dual Rate Front Shocks – These are the 11 7/8″ for use with Teixeira Tech Long Shock A-Arm package. Use with long travel A-arms ONLY. |  |
|
| LT80 Long Travel Dual Rate Rear Shock – Use with long travel swing arm ONLY. |  |
|
 |
||
| LT80 Dura Blue Eliminator +3 Extended Axle – This axle comes with a Lifetime warranty. |
|
|
