Dynojet UTV Power Commander V FI Controller
- Features fuel and timing control, Rev Xtend and is a reduced size from the PCIII USB
- Warm-up fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
- The Power Commander III USB allowed you to add extra fuel during start-up based on number of revolutions of the engine – Now the easy-to-install Dynojet UTV Power Commander V FI Controller reads the exact engine temp through the bikes own ECM, allowing the tuner to choose how much fuel to add
- More tuning ranges than PCIII USB
- Enhanced accel pump utility
- USB powered from computer; 9 volt adapter is no longer needed
- Cold starting on heavily modified engines should now be much more controllable and easy to adjust
- Software displays J1850 data from bikes stock ECU
- Two-position map switching function built in
- Can add any SPST switch and toggle between two different fuel/timing maps
- Gear/speed input allows for map adjustment based on gear
- Analog input allows user to install any 0-5 volt sensor
- Build an adjustment table based on analog input such as boost or temperature
- Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
- Ten throttle position columns
- Made in the U.S.A.
Could not load product information