Can-Am Maverick Parts and Accessories
This page is dedicated to Maverick Parts and Accessories. If you are looking for performance you have come to the right place! We carry pistons, valves, fuel controllers, intake kits, clutches, and so much more. We also specialize in many performance modifications and services. We offer porting, 3 or 5 angle valve jobs, dyno tuning, and even complete motor building services. So if you dont see it here then give us a call or email us.
| Description | Price | Photo |
 |
||
| Maverick Head Porting – CT Racing has done significant amounts of flow bench and dyno testing to offer you the best port layout for your application. We highly recommend getting a valve job at the same time the head is being ported. Our CNC valve job ties in with the port work to offer extremely effective flow numbers. | $600.00 | |
| Maverick 3 Angle Valve Job – The 3 angle valve job just freshens up your head bringing it back to original service limits. Quality valve job. | $240.00 |  |
| Maverick 5 Angle Radius Race Valve Job – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. | $320.00 |  |
| Maverick 5 Angle Radius Race Valve Job for +1mm Intake & Exhaust Valves – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. The 5 angle valve job really shines on big valves as the seat diameter is opened up all the way into the aluminum casting, blending to the port work. Adding +1mm valves to a modified engine package helps the mid to top-end horsepower. Most aftermarket hi compression pistons are clearanced for +1mm valves. | $384.00 |  |
| Hone Nikasil Cylinder | $50.00 |  |
| Split 4 Stroke Cases, Inspect Crank, plastigage and fit rod bearings & Reassemble | $600.00 | |
| Disassemble & Reassemble Polaris 4 Stroke head (from bottom-end only) | $300.00 | |
| Disassemble Head, Clean Ports, Prep, & Reassemble | $95.00 | |
 |
||
| DuraBlue Foam Air Filter | $89.00 |
 |
| S&B Filter Particle Separator | $399.95 |
 |
 |
||
| Maverick JE Piston Kit 91mm – Available in 9:1, 12:1, 12.5:1 and 13:1 Comp Ratio. Sold in pairs. | |
 |
| Winderosa Complete Top-end Gasket Set – Available in 80mm. Does includes valve stem seals. | $116.95 | |
| Winderosa Complete Gasket Set – Available in 80mm. Does includes all oil seals. | $190.95 |  |
| Kibble White Stainless Steel Valves – Available in Standard or +1mm Oversized in both Intake or Exhaust Valves. | |
 |
| Kibble White Lightweight Racing Valve Spring Kit – This Kit is Recommended to use with above Cams. | |
 |
 |
||
|
Maverick EPI Performance Sport Utility Clutch Kit – EPI Performance clutch kits come pre-set for your terrain and UTVs application. EPI offers only quality Maverick Parts and Accessories, |
|
 |
|
Maverick EPI Performance Sand Dune Clutch Kit – EPI Performance clutch kits come pre-set for your terrain and UTVs application. EPI offers only Maverick Parts and Accessories, |
|
 |
 |
||
| Dobeck performance AFR+ Auto-tune System Gen4 – The clear choice for complete fuel management needs. Fuel Controller, O2 sensor, and wide band all in one kit. The AFR+ can be can be adjusted “on the fly” to tuen your vehicle. No computer or other external device is needed to make tuning adjustments. | |
 |
|
Dynatek Fusion EFI Controller – Direct plug in performance: Dynatek has produced a state-of-the-art EFI controller which allows you to tune both fuel and ignition timing. Identical to the PC5 as far features and function. |
|
 |
|
Dynojet Power Commander V Fuel Injection Controller – Direct plug in performance: easy to install, increased throttle response and acceleration, includes “dyno proven” UTV specific map database, user friendly software, and more. This is the new PC5 with both Fuel and ignition tuning. The ignition can be re-mapped and the RPM range can be extended. Also for those of you with a Turbo, available with boost tuning for Turbo use. |
$399.95 |
 |
|
Dynojet Power Commander V Autotune Kit – Automatically monitors and adjusts fuel mixture while you ride. Must use with Power Commander V. |
$324.95 |
 |
|
Dynojet POD-300 Digital Display Kit – Accessory digital display for the Power Commander V and Autotune. |
$249.99 |
 |
 |
||
| Pro Armor UTV Harness – Available in your choice of color and 2″ or 3″ thickness. Feature sewn together design, cell phone pocket, and padded shoulder strap. | |
 |
| Slasher UTV Harness – Available in Black or Red and 2″ or 3″ thickness. Feature sewn together design and padded shoulder strap. | |
 |
