Can-Am Commander Parts and Accessories
This page is dedicated to Commander Parts and Accessories. If you are looking for performance you have come to the right place! We carry pistons, valves, fuel controllers, intake kits, clutches, and so much more. We also specialize in many performance modifications and services. We offer boring, re-sleeves, porting, 3 or 5 angle valve jobs, dyno tuning, and even complete motor building services. So if you dont see it here then give us a call or email us.
| Description | Price | Photo |
 |
||
| Commander Head Porting – CT Racing has done significant amounts of flow bench and dyno testing to offer you the best port layout for your application. We highly recommend getting a valve job at the same time the head is being ported. Our CNC valve job ties in with the port work to offer extremely effective flow numbers. | $600.00 | |
| Commander 3 Angle Valve Job – The 3 angle valve job just freshens up your head bringing it back to original service limits. Quality valve job. | $240.00 |  |
| Commander 5 Angle Radius Race Valve Job – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. | $320.00 |  |
| Commander 5 Angle Radius Race Valve Job for +1mm Intake & Exhaust Valves – The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. The 5 angle valve job really shines on big valves as the seat diameter is opened up all the way into the aluminum casting, blending to the port work. Adding +1mm valves to a modified engine package helps the mid to top-end horsepower. Most aftermarket hi compression pistons are clearanced for +1mm valves. | $384.00 |  |
| Hone Nikasil Cylinder | $50.00 |  |
| Split 4 Stroke Cases, Inspect Crank, plastigage and fit rod bearings & Reassemble | $600.00 | |
| Disassemble & Reassemble Polaris 4 Stroke head (from bottom-end only) | $300.00 | |
| Disassemble Head, Clean Ports, Prep, & Reassemble | $95.00 | |
 |
||
| DuraBlue Foam Air Filter | $89.00 |
 |
 |
||
| Commander 1000 JE Piston Kit 91mm – Available in 9:1, 10.2:1, 11:1 and 12.5:1 Comp Ratio. Sold in pairs. | |
 |
| Commander 1000 JE Piston Kit 93mm – Available in 12.5:1 Comp Ratio. Sold in pairs. | |
|
| Cometic Gasket Top-end Gasket Set – Available in 92mm, 93mm, 94mm, and 96mm. Note: Includes valve stem seals. | |
 |
| Winderosa Complete Top-end Gasket Set – Available in 80mm. Does includes valve stem seals. | $116.95 | |
| Winderosa Complete Gasket Set – Available in 80mm. Does includes all oil seals. | $190.95 |  |
| Web Cam Camshaft – Only custom grinds available at this time. | Call for Details |  |
| Kibble White Stainless Steel Valves – Available in Standard or +1mm Oversized in both Intake or Exhaust Valves. | |
 |
| Kibble White Lightweight Racing Valve Spring Kit – This Kit is Recommended to use with above Cams. | |
 |
